Adjusting Hunter Pro-Spray sprinkler heads can be done by following these steps:
Turn off the water supply to the sprinkler system to avoid any accidental water spray.
Remove the Hunter Pro-Spray sprinkler head from the riser using a wrench or pliers.
Locate the spray adjustment screw on the top of the sprinkler head. This screw is typically a small, flathead screw in the center of the head.
Use a screwdriver to adjust the spray distance of the sprinkler head. Turning the screw clockwise will decrease the spray distance, while turning it counterclockwise will increase the spray distance.
To adjust the spray pattern, locate the arc adjustment screw on the side of the sprinkler head. Use a screwdriver to turn the screw to adjust the angle of the spray pattern.
Reattach the sprinkler head to the riser and turn on the water supply to the sprinkler system.
Test the sprinkler head to ensure it is spraying in the desired pattern and distance.
If necessary, repeat the adjustment process until you achieve the desired spray pattern and distance.
Remember, it's always best to consult the manufacturer's instructions for specific details and settings for your Hunter Pro-Spray sprinkler heads.
0 Comments